AT10-25 cast Metal False Teeths for Timing Belt
These are cast false teeth from stainless steel, they are quite inexpensive for timing belt. we are able to supply the complete system (timing belt with false teeth) with very fast turnaround times, and for those looking for false teeth only, these can be shipped immediately. (25, 32, 50, 75 100mm). By mechanically attaching the…
These are cast false teeth from stainless steel, they are quite inexpensive for timing belt. we are able to supply the complete system (timing belt with false teeth) with very fast turnaround times, and for those looking for false teeth only, these can be shipped immediately. (25, 32, 50, 75 100mm).
By mechanically attaching the carriers to an AT10 timing belt, we are able to position the carrier exactly on the timing belt, even with small tolerances, we mill away the existing tooth and replace it with a metal tooth. As shown in the picture above, it makes it possible to decide for yourself which material you want to make your carriers from. This makes it very easy to replace damaged carriers without replacing the entire timing belt.
parameter
| Size | 25AT10-M4-2 |
| Screw thread | M4 |
| Material | Martensitic precipitation-hardening stainless steel, 15–27 HRC |
| Craft | Casting |
| Applicable tooth profile | AT10 |
| Applicable tooth width | 25mm |
| AT10 | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Description | A (mm) | W (mm) | C (mm) | B（mm） | Ø D (mm) | Number of holes | L (mm) | E (mm) | F（mm） | ||
| 25AT10-BT | 4.5 | 6.9 | 12 | 6 | 6 | 2 | 24mm | M4 | 2.4 | ||
| 25AT10-ST | 4.5 | 6.9 | 12 | 6 | 6 | 2 | 24mm | M4 | 2.4 | ||
BT = Brass teeth
ST = Stainless steel teeth
