Products
- ATM Belt
- Conveyor Belts
- Flat Belt
- Haul Off Belts
- Nylon Belt
- Plastic Module Conveyor Belt
- Printer Belts
- PU Conveyor Belts
- PU Timing Belts
- Pulleys
- PVC Conveyor Belts
- Ribbed Belt Pulleys
- Robot Track Belts
- Roller Chain
- Rubber Coated Timing Belts
- Rubber Flat Belt
- Rubber Timing Belts
- Sausage Timing Belts
- Silicone Conveyor Belts
- Sprockets and Gear
- Stainless steel mesh belt
- Timing Belt Pulleys
- Timing Belts Coating
- V Belt Pulleys
- VFFS Pull Down Belts
Featured products
AT10 Pu timing belts
AT10 polyurethane synchronous（timing） belts Truly Endless – usually consist of polyurethane body and steel cord, while custom materials available upon request. Special cords include aramid (kevlar), stainless steel and carbon fiber. AT10 PU timing belts Truly Endless – most commonly offered in widths of 10mm, 16mm, 20mm, 25mm, 32mm, 50mm, 75mm, 100mm and 150mm, while custom sizes (lengths, widths and pitches) are available upon…
AT10 polyurethane synchronous（timing） belts Truly Endless – usually consist of polyurethane body and steel cord, while custom materials available upon request. Special cords include aramid (kevlar), stainless steel and carbon fiber.
AT10 PU timing belts Truly Endless – most commonly offered in widths of 10mm, 16mm, 20mm, 25mm, 32mm, 50mm, 75mm, 100mm and 150mm, while custom sizes (lengths, widths and pitches) are available upon request.
Description
Part No 25-AT10-2500 Belt Type Truly Endless
Length [mm] 2500 Pitch [mm] 10
Width [mm] 25 Number of Teeth 250
Tooth Profile AT Belt Type Closed Loop
Tensile Cord Steel Operating Temp C -30 Degrees ~ +90 Degrees C
Body Material PU Operating Temp F -22 Degrees ~ +194 Degrees F
Nylon Fabric PAZ, PAR Cleats On Request
(Note: Custom widths and sizes available upon request)
Standard Widths [mm]:
10, 12, 16, 20, 25, 32, 50, 75, 100, 150 mm
Standard Lengths [mm]:
400, 440, 500, 530, 560, 580, 600, 610, 630, 66, 700, 720, 780, 800, 810, 840, 850, 880, 890, 920, 960, 970, 980, 1000, 1010, 1050, 1080, 1100, 1150, 1200, 1210, 1240, 1250, 1280, 1300, 1320, 1350, 1360, 1400, 1420, 1480, 1500, 1530, 1600, 1700, 1720, 1800, 1860, 1900, 1940, 2000, 2120, 2240, 2360, 2500, 2650, 2800, 3000, 3150, 3350, 3550, 3750, 4000, 4250, 4500, 4750, 5000, 5300, 5600, 6000, 6300, 6700, 7100, 7500, 8000, 9000 mm
| Trapezoidal Profile | AT10 |
| Tooth Pitch t [mm] | 10 |
| Base Belt Thickness H [mm] | 2.0 |
| Tooth Height h [mm] | 2.5 |
| Overall Belt Thickness H [mm] | +/- 0.5 |
| Width Tolerance [mm] | +/- 0.5 |
| Length Tolerance [mm] | +/- 0.2 |
| Thickness Tolerance [mm] | 4.5 |
| Hardness | 92 Shore A |
| Body Materials | Polyurethane (PU) |
| Tensile Members | Steel |
| Color | White |
| Minimum of Teeth on Pulley | 15 |
| Minimum Pulley Diameter [mm] | 50 |
| Tooth Angle 2β [°] | 50 |
| Rotational Speed | 10000 min-1 |
| Peripheral Speed | 60 ms-1 |
| Ultimate Tensile Strength [N/10mm belt width] | 6800 |
| Maximum Allowable Tensile Strength M [N/10mm belt width] | 1700.0 |
| Maximum Allowable Tensile Strength V [N/10mm belt width] | 850.0 |
| Unit Mass kg/m [Width: 10mm] | 0.058 |
Tensile Cords
- Steel Cords
- Reinforced Steel Cords
- Stainless Steel Cords
- Aramid Kevlar Cords
- Extra Flexible Steel Cords
Reducing Sliding Resistance
- Nylon Fabric on Tooth Side (PAZ)
- Nylon Fabric on Back Side (PAR)
- Nylon Fabric on Tooth Side & Back Side (PAZ/PAR)
Mechanical properties
- Friction / adhesion
- Abrasion resistance
- Wear resistance
- Release
- Cut resistance
- Compressibility
Physical properties
- Antistatic
- Electrical conductivity
- Flame retardant
- Cold resistance
- Hydrolysis resistance
Chemical properties
- Oil and fat resistance
- Food approved
- Easy to clean
- Acid and base resistance
- Ozone and UV resistance
Applications
AT10 belts find applications across a wide range of uses, including construction machines, pumps, paper-making machines, compressors, textile machines, roller-table drives.